ID: A The Drawing Limits command can be selected from one of the following pull-
ID: 2074441 • Letter: I
Question
ID: A The Drawing Limits command can be selected from one of the following pull-down menus: a View b. Draw 14. c. Format d. Modify 15. You drawing will be printed at a scale of 1-0.5 on 11x8.5 paper. What is your drawing limits? 44%34" 22"x17" c. 11"x8.5* d. 5.5 *4.25 b. 16. To turn a layer off and prevent its regeneration you can select the following option in the Layer command a. Freeze b. Lock e. On/or d· Thaw 17. A layer filter a. b. Controls the display of layers Filters out good and bad layers c. d. Deletes layers Translates layers into a new file is. Select from the following commands to delete a segment of an object partially a. Break b. Extend c. Pedit d. Trim 19. Select the commands you can use to reposition an object to a new location. a. Copy b. Move c. Relocate d. Transpose 20. The Pedit command is used to edit polylines. Select the modifications from the following list. a. Curve c. Lineweight d. Spline 21. The Stretch command requires the use of the following selection technique. a. Crossing window Crossing polygon e. Polygon d. Window b Select the command to round off comers of an object at a specified radius. a. Chamfer b. Round-over 22. c. Fillet d. Offset Arcs are created in the following direction. a. Clockwise 23. Rotation angle setting User specified c. d. 24. The 3-point arc requires the selection of the following points Angle, radius and rotation Circumference points c. d. Start, center and angle Start, center and end a. b. 25. The following command is used to create a line that is fixed on one end and infinite in one direction a. Line b. Polyline c. Ray d. Xline 26. The folowing key is used to toggle between the edit commands once a grid is enabled: a. Alt b. Ctrl c. Spacebar d. TabExplanation / Answer
14) c
15) c
16) c
17) b
18) d
19)b
20) d
21) a
22) c
23) By default they are in counter-clockwise direction, Arcs can be drawn in clockwise direction by holding down the Ctrl key
24) d
25) c
26) b