Need help with PROBLEM 2 Figure 1 shows an incomplete model of the test process.
ID: 2247574 • Letter: N
Question
Need help with PROBLEM 2
Figure 1 shows an incomplete model of the test process. Draw a complete IDEF-3 based on the following information: Review all ICOMs and make sure that all ICOMS have been correctly attached to the activity blocks. The inputs to the "Testing" activity need to be provided at the same time. The two outputs from the "Testing" activity are produced at the same time. Incorporate additional information into the process model: "IF Frequency > 70Hz AND Delta = Negative, THEN Reject. IF FrequencyExplanation / Answer
Problem 2:
A. As per the problem, The "Toll Gate" will evaluate the followiing items:
1) Delta value versus Temperature
2) Temperatiure verus frequency
3) Delta value versus flow
Of these data elements for (1) and (2) are avilable from the previous stages.
e.g., Temperature is avilable from the input to the ystem.
Freuquency and noise are availablee from within 1st and 2nd stage and
Delta is available from within 2nd and 3rd stage.
Only flow-value is not available and needs to be provided externally to the Toll gate.
So the toll gate activities can be performed using the information in the model except for the 'flow' metric.