Measurement Lab (Protected View)-Word (Unlicensed Product) yout References Maili
ID: 2269234 • Letter: M
Question
Measurement Lab (Protected View)-Word (Unlicensed Product) yout References Mailings Review View Help Tell me what you want to do Procedure 2 In this procedure you will use the mass and spring simulator to get your data. Follow the procedure below and plot the mass weight and length of the spring when the masses are attached Click the above link or open a new window to https:/phet.colorado edu/sims/mass-spring-lab/mass-spring-lab en html. When you pull up the simulator there should 7 weights at the bottom of the screen You will measure the length of each mass in (cm). In the charts below you will measure the lengths of each mass according to their description in their respective location and time First you need to set your perimeters so that you will get the correct data. Ex. For table l you will make sure the time is in "real time", then you will measure each mass in the different locations 1. 2. 3, Huil 4. Once you attach the mass to the bottom of the spring. you will move and use the ruler to measure the length. The end of the ruler should be placed at the dashes to get the accurate measurement. From the dashes to the bottom line of the spring is the accurate lengthExplanation / Answer
Real Time Data
lo = 30 cm
Mass Jupiter Moon Earth X G = 0
50 g 10.4 0.9 0.5 2.0 0
100 g 27.9 0.15 10.5 4.5 0
250 g 11 0.4 25 10 0
Yellow 19 0.1 0.9 0.25 0
Green 42 0.22 17.1 0.8 0
Red - 0.6 31 1.3 0
now if we wait long enough for osscilations to die ( or make friciton too high), we will get the same reading in 1/4, 1/16 and pause after long time too