Please Answer each one of the following questions not just copying and pasting p
ID: 638513 • Letter: P
Question
Please Answer each one of the following questions not just copying and pasting please give me good answers and i will give you all the points.
Chapter 1
3) Discuss the relationship between network architecture and protocol.
5) Define the following terms: Protocol, Connection-oriented protocols, connectionless protocols, and protocol stacks.
11) briefly describe the seven layers of the OSI protocol hierarchy.
Chapter 3
1) In which layer of the OSI protocol hierarchy is the transmission medium found?
2) what are the two general categories of transmission media?
3) Define Transmission line.
4)Describe a transverse electromagnetic wave.
5) Define Wave velocity
6) Define frequency and wavelength
Chapter 4
1) Define an optical fiber transmission system
2) what is the relationship between bandwidth and information capacity?
Explanation / Answer
1.
The key to understanding complex networks is understanding their architecture. Architecture is the most universal, high-level, and persistent elemments of structure and organization (or principles of structuring and organizing a complex system). Protocols define how diverse modules interact, and architecture defines how sets of protocols are organized. Architecture usually involves specification of protocols (rules of interaction) more than modules (which obey protocols).
2.
Protocols:- In information technology, a protocol is the special set of rules that end points in a telecommunication connection use when they communicate. Protocols specify interactions between the communicating entities.
Connection-oriented protocols:-A connection-oriented transport layer protocol, such as TCP, may be based on a connectionless network layer protocol (such as IP), but still achieves in-order delivery of a byte-stream, by means of segment sequence numbering on the sender side, packet buffering and data packet reordering on the receiver side.
connectionless protocols:-The device sending a message simply sends it addressed to the intended recipient. If there are problems with the transmission, it may be necessary to resend the data several times. The Internet Protocol (IP) and User Datagram Protocol (UDP) are connectionless protocols.
The protocol stack is an implementation of a computer networking protocol suite. The terms are often used interchangeably. Strictly speaking, the suite is the definition of the protocols, and thestack is the software implementation of them.
3
OSI (Open Systems Interconnection) is a standard description or "reference model" for how messages should be transmitted between any two points in a telecommunication network. Its purpose is to guide product implementors so that their products will consistently work with other products. The reference model defines seven layers of functions that take place at each end of a communication. Although OSI is not always strictly adhered to in terms of keeping related functions together in a well-defined layer, many if not most products involved in telecommunication make an attempt to describe themselves in relation to the OSI model. It is also valuable as a single reference view of communication that furnishes everyone a common ground for education and discussion.
Developed by representatives of major computer and telecommunication companies beginning in 1983, OSI was originally intended to be a detailed specification of interfaces. Instead, the committee decided to establish a common reference model for which others could develop detailed interfaces, that in turn could become standards. OSI was officially adopted as an international standard by the International Organization of Standards (ISO). Currently, it is Recommendation X.200 of the ITU-TS.
The main idea in OSI is that the process of communication between two end points in a telecommunication network can be divided into layers, with each layer adding its own set of special, related functions. Each communicating user or program is at a computer equipped with these seven layers of function. So, in a given message between users, there will be a flow of data through each layer at one end down through the layers in that computer and, at the other end, when the message arrives, another flow of data up through the layers in the receiving computer and ultimately to the end user or program. The actual programming and hardware that furnishes these seven layers of function is usually a combination of the computer operating system, applications (such as your Web browser), TCP/IP or alternative transport and network protocols, and the software and hardware that enable you to put a signal on one of the lines attached to your computer.
OSI divides telecommunication into seven layers. The layers are in two groups. The upper four layers are used whenever a message passes from or to a user. The lower three layers (up to the network layer) are used when any message passes through the host computer. Messages intended for this computer pass to the upper layers. Messages destined for some other host are not passed up to the upper layers but are forwarded to another host. The seven layers are:
Layer 7: The application layer...This is the layer at which communication partners are identified, quality of service is identified, user authentication and privacy are considered, and any constraints on data syntax are identified. (This layer is not the application itself, although some applications may perform application layer functions.)
Layer 6: The presentation layer...This is a layer, usually part of an operating system, that converts incoming and outgoing data from one presentation format to another (for example, from a text stream into a popup window with the newly arrived text). Sometimes called the syntax layer.
Layer 5: The session layer...This layer sets up, coordinates, and terminates conversations, exchanges, and dialogs between the applications at each end. It deals with session and connection coordination.
Layer 4: The transport layer...This layer manages the end-to-end control (for example, determining whether all packets have arrived) and error-checking. It ensures complete data transfer.
Layer 3: The network layer...This layer handles the routing of the data (sending it in the right direction to the right destination on outgoing transmissions and receiving incoming transmissions at the packet level). The network layer does routing and forwarding.
Layer 2: The data-link layer...This layer provides synchronization for the physical level and does bit-stuffing for strings of 1's in excess of 5. It furnishes transmission protocol knowledge and management.
Layer 1: The physical layer...This layer conveys the bit stream through the network at the electrical and mechanical level. It provides the hardware means of sending and receiving data on a carrier.
Chapter 3
1.
The OSI, or Open System Interconnection, model defines a networking framework to implement protocols in seven layers. Control is passed from one layer to the next, starting at the application layer in one station, and proceeding to the bottom layer, over the channel to the next station and back up the hierarchy.
There's really nothing to the OSI model. In fact, it's not even tangible. The OSI model doesn't do any functions in the networking process, It is a conceptual framework so we can better understand complex interactions that are happening. The OSI model takes the task of internetworking and divides that up into what is referred to as a vertical stack
2.
Signals are usually transmitted over some transmission media that are broadly classified in to two categories.Guided Media:These are those that provide a conduit from one device to another that include twisted-pair, coaxial cable and fiber-optic cable. A signal traveling along any of these media is directed and is contained by the physical limits of the medium. Twisted-pair and coaxial cable use metallic that accept and transport signals in the form of electrical current. Optical fiber is a glass or plastic cable that accepts and transports signals in the form of light.Unguided Media: This is the wireless media that transport electromagnetic waves without using a physical conductor. Signals are broadcast either through air. This is done through radio communication, satellite communication and cellular telephony.
3.
In communications and electronic engineering, atransmission line is a specialized cable or other structure designed to carry alternating current of radio frequency, that is, currents with a frequency high enough that their wave nature must be taken into account.
4.
A transverse mode of a beam of electromagnetic radiation is a particular electromagnetic field pattern of radiation measured in a plane perpendicular (i.e., transverse) to the propagation direction of the beam. Transverse modes occur in radio waves and microwaves confined to a waveguide, and also in light waves in an optical fiber and in a laser's optical resonator.
5.
wave velocity, distance traversed by a periodic, or cyclic, motion per unit time (in any direction). Wave velocity in common usage refers to speed, although, properly, velocity implies both speed and direction. The velocity of a wave is equal to the product of its wavelength and frequency (number of vibrations per second) and is independent of its intensity.
6.
The wavelength and frequency of light are closely related. The higher the frequency, the shorter the wavelength. Because all light waves move through a vacuum at the same speed, the number of wave crests passing by a given point in one second depends on the wavelength. That number, also known as the frequency, will be larger for a short-wavelength wave than for a long-wavelength wave.
The equation that relates wavelength and frequency for electromagnetic waves is: ??=c where ? is the wavelength, ? is the frequency and c is the speed of light.
Chapter 4
Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of lightthrough an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information. First developed in the 1970s, fiber-optic communication systems have revolutionized the telecommunications industry and have played a major role in the advent of the Information Age. Because of its advantages over electrical transmission, optical fibers have largely replaced copper wire communications in core networks in the developed world. Optical fiber is used by many telecommunications companies to transmit telephone signals, Internet communication, and cable television signals. Researchers at Bell Labs have reached internet speeds of over 100 petabits per second using fiber-optic communication.
2.
Generally info capacity is related to Bandwidth by :
C=2B
But if we include the SNR of the system:
C=B log2(1+SNR) ----- From Shannon-Hartley Theorem